bcd . 002 8 3 _ aa_ september - 18 - 2013 1 www.power - one.com data sheet ? instrumentation ? li ghting ? industrial applications ? test and measurement ? renewable energy ? wireless data ? automation control ? applied computing abc 150 series 15 0w ac/dc ? 1 10 w convection cooled ? - 20 to 50 deg c full load operation ? 90 - 264 vac input ? 2 x 4 x 1.3 (101.6 x 50.8 x 33.6 mm) ? no minimum load required ? fan output, 12 vdc @ 0.5a standard ? conducted emi en 55022 - b, fcc part 15 level b ? ite safety agency approvals ? rohs compliant features applications
abc 150 series 2 www.power - one.com data sheet technical dat a : input parameter description/condition input voltage range universal input 90 - 264 vac 120 C 390 vdc input frequency range 47 - 63 hz input surge current 230 vac (cold start) 65 a max. safety ground leakage current 230 vac < 300 a input current 120 vac @ 150 w 230 vac @ 150 w 1.7 a 0.85 a output parameter description/condition voltage adjustment v1 3% transient response main output 50 to 100% load change, 50 hz, 50% duty cycle, 0.1a / usec < 10%, recovery time < 5 msec over voltage protection v1 110 to 150% rated max over current protection rated output current 110% typical short circuit protection automatic recovery efficiency >86% set point accuracy 1% rise time < 100 msec ordering information product family volts (vdc) max load convection (1) max load 300 lfm (1) minimum load (a) ripple & noise (4) connector total regulation abc150 - 1005g 5.0 16.0 a 16 a 0 1% jst 2.5% abc150 - 1 t 05g 5.0 16.0 a 20 a 0 1% screw terminal 2.5% abc150 - 1012g 12 8.33 a 12.5 a 0 1% jst 2.5% abc150 - 1 t 12g 12 8.33 a 12.5 a 0 1% screw terminal 2.5% abc150 - 1015g 15 6.67 a 10.0 a 0 1% jst 2.5% abc150 - 1 t 15g 15 6.67 a 10.0 a 0 1% screw terminal 2.5% abc150 - 1024g 24 4.17 a 6.25 a 0 1% jst 2.5% abc150 - 1 t 24g 24 4.17 a 6.25 a 0 1% screw terminal 2.5% abc150 - 1048g 48 2.08 a 3.13 a 0 1% jst 2.5% abc150 - 1 t 48g 48 2.08 a 3.13 a 0 1% screw terminal 2.5% vfan (all models) 12 0.5 a (3) 0.5 a (3) 0 20%
bcd . 002 8 3 _ aa_ september - 18 - 2013 3 www.power - one.com data sheet notes: 1. combined power from main output and vfan should not exceed total power rating. 2. fan output tolerance is 20% 3. peak power for fan output is 1 a. 4. ripple is 2% up to 20 % load and less than 1% above 20% load. output noise measurement is made with a 20 mhz bandwidth using a 6 twisted pair, terminated with a 10 uf tantalum capacitor in parallel with a 0.1 uf ceramic capacitor. 5. specifications are for nominal input voltage, 25 c and max load unless otherwise stated. 6. air flow over length of supply recommended (either direction) for forced air rating. 7. class 1 models have earthing tab j4. class 2 models ( - 2 suffix) have no earthing tab. 8. specifications subject to change without notice. 9. warranty 2 years. general specifications parameter description/condition hold up time 120 vac 6 msec 230 vac 10 msec mtbf >200 khrs bellcore tr - 332 switching frequency pfc converter variable 35 to 250 khz , 90 khz typical resonant converter : variable 35 to 250 khz, 90 khz typical isolation voltage input to output min 4242 vdc input to ground 2120 vdc weight 150 g (0.33 lbs) environmental parameter description/condition operating temperature operating - 20 to +70 c . s ee derating chart below. storag e - 40 to +85 c altitude operating 10,000 ft. non - operation 40,000 ft. conducted emissions: en55022, fcc part 15 level b humidity 95% non - condensing radiated emissions en55022, fcc part 15 level b to be controlled in end system electromagnetic susceptibility en61000 - 4 - 2 level 3 2, 3, 4, 5 level 3 harmonic current en61000 - 3 - 2, class d safety parameter description/condition en / ul / csa en60950 - 1+a12:2011, iec60950 - 1 2 nd +a1 2009, csa - 22.2 no 60950 - 01 - 07+ a1, ul60950 - 1 - 2011
abc 150 series 4 www.power - one.com data sheet figure 1 output power vs. temperature figure 2 dimension drawing (top and side view) mechanical input = j1 earthing tab = j4 dc output = j2 fan= j3 pin 1: ac line pin 2: ac neutral molex: 19705 - 4301 pin 1 = v1 pin 2 = v1 pin 3 = rtn pin 4 = rtn pin 1 = +12 v @ 0.5 a pin 2 = fan return (isolated from dc output ) mating connector: molex: 09 - 50 - 3031 pins: 08 - 50 - 0106 mating connector: molex: 190030001 mating connector: jst vhr - 4m , pins: svh - 41t - p1.1 awg #20 to #16 mating connector: tyco : 640440 - 2 copyright ? 2010 power - one inc. all rights reserved. words and logos that are identified as trademarks and/or service marks are, unless noted otherw ise, the trademarks and service marks of power - one inc. in the u.s. and other countries. all other product o r service names are the property of their respective holders. power - one products are protected under numerous u.s. and foreign patents and pending applications, maskwork rights, and copyrights. power - one reserves the right to make changes to any products a nd services at any time without notice. power - one assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by power - one inc. nuclear and medical applications - power - one products are not designed, intended for use in, or authorized for use as critical components in life su p- port systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of power - one, inc. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change depending on the date manuf a c- tured. specifications are subject to change without notice.
|
